RSS Feed

news archive

NEW MODEL YODER REDUCING MILL DESTINED FOR EUROPE

Saturday, October 25, 2008
Press Release - Yoder Reducing Mill.pdf

Yoder Manufacturing of Cleveland, Ohio, a member of the Formtek Group, has developed a new version of its W-10S/W-15S Reducing Tube Mill System to meet the needs of small diameter appliance refrigeration and automotive fuel line tubing. The Yoder W-10S/W-15S can produce ½” diameter tube and reduce a range of finish diameters and wall thicknesses down to 3/16”. The reducing section is independently adjustable, for 3/16” to 1/2” finish diameters. The versatility of this reducing configuration, recently updated with full digital controls, decreases changeover time and improves repeatability of setups.  Additional upgrades of the mill enable sizing of tubes up to 1” diameter, along with its reducing capabilities.  All of this is now available with CE certification for use in Europe.

For more information, please contact yoder@formtekcleveland.com, or direct at (800) 631-0520.  Or visit us on the web at www.yodermfg.com.